Walkin’ Wheels Full Support/4-Wheel LARGE

Your pet’s new Walkin’ Wheels dog wheelchair comes with everything your pet needs to get up and walking again!

The Front Wheel Attachment is easy to assemble and connect to a Walkin’ Wheels Rear wheelchair.

• 1 set (2) Wheel Struts and Casters
• 1 set (2) Legs
• 2 Extenders
• 1 set Leg Rings
• 1 Chin Bar
• 1 Chin Bar Cover
• Nuts, Bolts, and Allen Key

• 1 Frame
• 1 Set of extenders
• 1 Connector 1 Set (2) Foam Wheels
• 1 Front Harness with Sleeves
• 1 Set Leg Rings Rear Support Saddle
• 1 Belly Belt
• 2 Stirrups
• 1 Instruction Manual

Frame:

The Frame is powder-coated aluminum in blue or pink. It will not bend, break, or rust. The molded plastic knuckles attach the frame to the legs; 360 degrees of ‘teeth’ hold the knuckle in place. On the side of the knuckle, a spring-loaded turning cap allows you to loosen the knuckle and swivel the legs up or down.

Width Connectors: (one 9″ connector)

The width connector connects the left and right side of the frame together. If the width of your dog is 5- 9.5 inches, you will use the smaller width connector; 9-13.5 inches will need the longer connector.

Length Extenders: (2 extender sets with regular frame)

The adjustable length extenders connect the front harness in place with the wheelchair. There are two different sizes. If the dog is 9-19 inches, the smaller extenders are used. The small extenders will already be attached to the wheelchair. If the animal’s length is 18-25 inches, the larger extenders are needed. Length is determined by back of front leg to back of rear leg.

The Front Harness

The dog’s head goes between the blue and black straps. The red strap goes under the dog’s front legs and clips on the side of the harness. The shoulder pads are made of neoprene and keep the straps and buckles from causing discomfort for the dog. Neoprene comfort sleeves wrap around the straps for the dog’s comfort. Comfort sleeves can be cut in half if they are too long.

Leg Rings:

The dog’s hindquarters are held in place by the leg rings, or our rear harness support system. The leg rings can also be used as a lifting harness when out of the wheelchair; the excess strapping can be touch-fastened together to make handles on each side.

Struts & Foam Wheels:

Depending on your pet’s fold of flank measurement, you will receive a set of wheels attached to struts. Struts snap into the leg of the wheelchair frame and adjust to the height needed. Struts are adjustable within a range of 3 inches and come in 4 different sizes: 6”, 9”, 12”, & 15”. The foam wheels are great for all terrains. They feature a dense foam interior with an outer rubber layer. These wheels will not puncture, they wear extremely well, and are easy to clean. Sizes available: 12″ & 16″.

Struts

Depending on your pet’s fold of flank measurement, you will receive a set of wheels attached to struts. Struts snap into the leg of the wheelchair frame and adjust to the height needed. Struts are adjustable within a range of 3 inches and come in 4 different sizes: 6”, 9”, 12”, & 15”. 

Belly Belt:

The Belly Belt will help support your dog’s back. It is not always necessary to use the belly belt, but is highly recommended for dogs with a long back, overweight or elderly dogs, dogs with curvature of the spine, and dogs with disc problems.

Stirrups:

Stirrups are used to hold the dog’s legs off the ground so they don’t drag due to paralysis, knuckling under, or foot injuries. The adjustable stirrups are positioned to hold the foot up at the hock. If your dog doesn’t need them, the stirrups may be removed from the wheelchair.

The Manual:

The manual gives instructions and tips on assembling and using the Walkin’ Wheels Wheelchair.

Tool Kit:

The tool kit comes in a plastic bag and includes and Allen wrench and set screws. The (optional) set screws may be used to tighten up the wheelchair frame and reduce flexibility, depending on your preference.

Yes, the dog wheelchair will gives pets the support they need to stand, walk, and rebuild their strength. The wheelchair supports your dog to relieve pressure and reduce the weight placed on their legs making it easier for them to walk. We encourage your dog to use his/her rear legs to maintain muscle mass and to get exercise, while using their cart your pet will work to develop the muscle in the rear legs and build up their stamina as they exercise. A dog does not need to be fully paralyzed to benefit from using a dog wheelchair. If the rear legs are paralyzed, then the stirrups will keep their legs from dragging.

Yes, the Walkin’ Wheels is very easy to transport. Simply turn the dial on the knuckle wheelchair to fold in the wheels and struts, making it easy to carry and travel with.

It’s easy to determine the right size Walkin’ Wheels wheelchair for your pet. All you need is two simple measurements to choose the right size wheelchair for your pet: 

1. Measure the Rear Leg Height to the toe pad, ideally when your pet is laying down. Do not pull the leg tight; leave some natural bend. 
2. Your pet’s armpit to rump (ATR) measurement. To measure your pet’s length, measure from behind the front leg and across to the end of your dog’s body or rump. 

Already have your dog’s rear leg height and body length measurement? Let our SureFit® Calculator help you find the perfect size wheelchair for your best friend! 

https://youtu.be/XGOqVbmG6-4 

If you have a small pet, it is OK for them to take a rest up against a pillow or bed, because their legs are so short. Otherwise, it is not recommended, due to back or disc issues that could worsen by laying down in the wheelchair.

No. Our chair is designed NEVER to collapse on the dog’s leg or spine. We’ve gone to great lengths to be sure of it. The chairs are designed with the help of veterinarians and rehabilitation specialists to hold the dog up, keeping the spine and legs in the optimal position for safety and healing. 

What’s more, the purpose of the chair is to give the dog exercise and the freedom to go outside and do his business. When the dog is tired, you should never leave him in the chair. 

The reviews we have seen of the experimental sit-down spring-loaded style have not been positive. Although we have done a great deal of research, we have not found a safe way for a chair to collapse on a dog. 

Yes! In fact, your dog’s wheelchair is designed so that dogs can go to the bathroom and get the exercise they need. Not only can pets pee and poop while using their dog wheelchair, but their wheelchair also actually encourages them to go. A “down” dog tends to be less active, which can impact the internal functions of their body. Once a dog is in their wheelchair, they are standing upright and moving more which encourages their body to function correctly and allow them to relieve themselves naturally.

How does it work?

Both male and female pets can pee and poop freely while using their wheelchair. Their hind end is fully supported from underneath by their rear leg rings keeping them in a comfortable and natural standing position. Although your pet can not squat while in their wheelchair, they will relieve themselves while standing.

Orders over $49 USD ship free within the contiguous US and Canada.

Our mission is to ensure that your shipment arrives to you and your pet as quickly as possible. We make every effort to fulfill orders within24 to 48 hours of receiving them. Our shipping department processes products Monday through Friday. We partner with multiple carriers, including USPS, FedEx, and UPS, to assist with delivery. Shipping typically takes 1 to 5 business days, unless an Overnight option is chosen. For international shipments, delivery times are guaranteed up to Customs within that same time frame.

We charge sales tax for items shipped to the following states: FL, CA, PA, NV, IL, TX, and NJ.

Give our friendly Customer Service team a call at 1-888-253-0777, and we’ll provide you with your Return Authorization number and instructions for returning your items. Easy as that!